Compatible with normal phase chromatography solvent mixtures and DIY column chromatography applications. Additionally suggested for in-line hydrocarbon CRC applications where a small plug of CR60 is suggested, 1-10% m/m estimated extract in solution.
Media Bros - CR60
- CAS Number: 7631-86-9
-
Hazardous Ingredients: Silica-Amorphous, precipitated
-
WT% <=100%
-
GHS Classification: NOT CLASSIFIED
Information on basic physical and chemical properties
PHYSICAL STATE: Solid
ODOR: Odorless
ODOR THRESHOLD (PPM): Not Available
APPEARANCE / COLOR: Dry white granules
pH: Not Applicable
MELTING / FREEZING POINT (F°): Not Applicable
BOILING POINT (F°): Not Applicable
FLASH POINT (F°): Not Applicable
EVAPORATION RATE (nBuAc = 1): Not Applicable
FLAMMABILITY (solid, gas): Not Applicable
FLAMMABLE LIMITS (in air by volume, %): Not Applicable
VAPOR PRESSURE (mmHg): Not Applicable
VAPOR DENSITY (AIR=1): Not Applicable
RELATIVE DENSITY Not Applicable
SOLUBILITY IN WATER (%) Not Applicable
PARTITION COEFFICIENT: N-OCTANOL/WATER: Not Applicable
AUTOIGNITION TEMPERATURE: Not Applicable
DECOMPOSITION TEMPERATURE: Not Applicable
VISCOSITY: Not Applicable
EXPLOSIVE PROPERTIES: Not Applicable
OXIDISING PROPERTIES: Not Applicable
Other Information
SPECIFIC GRAVITY 4°C: (Water = 1) Not Available
DENSITY: 3.0 - 4.0 g/cm3
VOC: Not Applicable
WEIGHT PER GALLON: Not Applicable
SECTION 10 - STABILITY and REACTIVITY
Reactivity: No data is available.
Chemical Stability: Product is stable under recommended storage conditions.
Possibility of Hazardous Reactions: No data available.
Conditions to avoid: No data available.
Incompatible materials: No data available.
Hazardous Decomposition Products: No data available.
Preparation
Required Materials:
- CR60 Filtration Aid, WInterization Aid
- In-Line Filtration Housing
Procedure
- Load filter media into filtration housing or solution
- Ensure that media is secured in filtration housing
- 1 micron mesh screen works well to secure filtration media
- CR60 does not need to be wetted prior to use
- Run filtration using polar or non-polar solvent
- Avoid saturation and maintain flow
- Follow disposal instructions in SDS
